Quality assurance

Our certificates,
open to inspection.

ARVORE’s current certificates, each with the body that issued it, its number, scope and validity, so you can verify it with the issuer before you rely on it.

Editorial photograph

Current certificates

Status on 21 Nov 2026. Select a certificate for its issuer, number, scope and validity.

Quality management

Management-system certificates for quality. Each applies to the scope printed on it.

ISO 9001:2015 Quality management system, page oneView the certificate (PDF) (opens in a new tab)
ISO 9001:2015Valid

Quality management system

Certificate number
Q7-32393/0
Validity
23 Jan 2025 to 22 Jan 2028
About this certificate

The certified scope is the supply of the products listed. Validity is maintained by annual surveillance audits and a renewal audit after three years.

Scope stated on the certificate

Supply of Orthopedic Implants, Orthopedic Instruments, Rehabilitation Products, Medical Equipments, Sterile Disposable Medical Devices, Surgical Equipments, Laboratory Products.

ISO 13485:2016 Medical devices quality management system, page oneView the certificate (PDF) (opens in a new tab)
ISO 13485:2016Valid

Medical devices quality management system

Certificate number
M7-00464/0
Validity
23 Jan 2025 to 22 Jan 2028
About this certificate

Quality management system for medical devices (requirements for regulatory purposes). The certified scope is the supply of the products listed. Validity is maintained by annual surveillance audits and a renewal audit after three years.

Scope stated on the certificate

Supply of Orthopedic Implants, Orthopedic Instruments, Rehabilitation Products, Medical Equipments, Sterile Disposable Medical Devices, Surgical Equipments, Laboratory Products.

Environment, health and safety

Management-system certificates for environmental management and for health and safety at work.

ISO 14001:2015 Environmental management system, page oneView the certificate (PDF) (opens in a new tab)
ISO 14001:2015Valid

Environmental management system

Certificate number
305026012822E
Validity
28 Jan 2026 to 27 Jan 2029
About this certificate

Validity is subject to annual surveillance audits, due by 27 January 2027 and 27 January 2028.

Scope stated on the certificate

Design, manufacturing, marketing, export & sales of sterile & non-sterile orthopaedic implants & instruments, spinal implants & instruments, external fixators, arthroscopy implants, surgical instruments, medical equipments, sterile disposable medical devices, surgical devices, hospital furniture, hospital equipment, pharmaceuticals & laboratory products.

ISO 45001:2018 Occupational health and safety management system, page oneView the certificate (PDF) (opens in a new tab)
ISO 45001:2018Valid

Occupational health and safety management system

Certificate number
305026012823HS
Validity
28 Jan 2026 to 27 Jan 2029
About this certificate

Validity is subject to annual surveillance audits, due by 27 January 2027 and 27 January 2028.

Scope stated on the certificate

Design, manufacturing, marketing, export & sales of sterile & non-sterile orthopaedic implants & instruments, spinal implants & instruments, external fixators, arthroscopy implants, surgical instruments, medical equipments, sterile disposable medical devices, surgical devices, hospital furniture, hospital equipment, pharmaceuticals & laboratory products.

Certificates of compliance

Certificates of compliance from a certification body. “About this certificate” on each says what it covers and what it does not.

CE certificate of compliance (EU MDR 2017/745), page oneView the certificate (PDF) (opens in a new tab)
CEValid

Certificate of compliance (EU MDR 2017/745)

Certificate number
CE-7498
Validity
30 Jan 2026 to 29 Jan 2029
About this certificate

A certificate of compliance issued by UK Certification & Inspection Limited, stating that the technical files of the product groups listed comply with the requirements of the EU Medical Devices Regulation (EU) 2017/745. As the certificate states, it is based on the evaluation of a test report of one sample and does not imply an assessment of the whole production; the CE mark is used under the manufacturer's responsibility after an EC declaration of conformity. Validity is subject to surveillance audits.

Scope stated on the certificate

Sterile & non-sterile orthopaedic implants & instruments, spinal implants & instruments, external fixators, arthroscopy implants, surgical instruments, medical equipments, sterile disposable medical devices, surgical devices, hospital furniture, hospital equipment, pharmaceuticals & laboratory products.

WHO-GMP certificate of compliance, page oneView the certificate (PDF) (opens in a new tab)
WHO-GMPValid

Certificate of compliance

Certificate number
UQ-2026013002
Validity
30 Jan 2026 to 29 Jan 2029
About this certificate

A certificate of compliance with the Good Manufacturing Practice norms laid down by the World Health Organization, issued by UK Certification & Inspection Limited, a private certification body; it is not issued by the WHO or by a national drug regulator. It applies to the quality system maintained in the manufacture of the products listed, and its validity is subject to surveillance audits.

Scope stated on the certificate

Design, manufacturing, marketing, export & sales of sterile & non-sterile orthopaedic implants & instruments, spinal implants & instruments, external fixators, arthroscopy implants, surgical instruments, medical equipments, sterile disposable medical devices, surgical devices, hospital furniture, hospital equipment, pharmaceuticals & laboratory products.

For buyers and tender officers

How to check a certificate

  1. Note the certificate number and the body that issued it.

  2. Look the number up with the issuer, using the “Verify with the issuer” link on each certificate.

  3. Check that the scope covers the products you are buying and that the certificate is within its validity.

  4. Ask us for a copy of the certificate and for the documents your tender needs for a specific model; we will tell you what is available.

A management-system certificate, such as ISO 9001 or ISO 13485, shows that an organisation’s processes were audited against the standard for the scope printed on it. It does not approve individual products, and it is not, by itself, CE marking or a product registration in any country.

Our quality philosophy

A systematic approach
to product quality.

ARVORE’s quality programme covers product development, supplier performance and customer requirements, from specification to delivery.

Explore manufacturing →

Quality management focus

  • Develops and improves the quality of our products.
  • Ensures that the products are in compliance with industry standards.
  • Ensures that products are in line with the specifications and as per integrity.
  • Ensures minimisation of risk.
  • Targets customer satisfaction.
  • Follows best work practices.
  • Enhances supplier performance.

Frequently asked questions

A little clarity before your next step.

How can I request a product quotation?

Find a model in the catalogue, select its configuration where available, and add it to your inquiry list. Review quantities and share your requirements through the quote form.

Can I discuss an international or bulk order?

Yes. Include the equipment list, quantities and destination in your inquiry. Our team can discuss the available supply options and documentation for your project.

Where can I find product certificates and specifications?

Product pages show the available specifications and approved downloads. If a document is not listed, request the current document for your exact model and destination from our team.

Why do some products say images coming soon?

Product photography is being added to the catalogue. You can still review the available model information and request details from our team.

Let’s build a healthier tomorrow, together.

Tell us about your equipment, documentation and export requirements.

Request a quote